Specifications

Other Digidesign PCI Card Options - Pro Tools|24 for the Mac OS
MIX Farm: Maximum of 7 MIX Farm or MIX Core cards supported. If you
are adding one or more MIX Farm cards to a Pro Tools|24 system, refer to
the
Pro Tools Expanded Systems Guide
DSP Farm*: DSP Farms with serial numbers lower than FG10501 may be
used for Plug-In operation but do not support connection of an Audio
Interface.
Pro Tools|24 Expansion Kit (discontinued)
SampleCell II Plus: The current version of the SampleCell Editor, version
2.1.1, recognizes no more than one SampleCell II or SampleCell II Plus
card in 2001 AGP G4 models (466MHz, 533MHz, Dual 533MHz, 667MHz,
and 733MHz).
SampleCell II*
SampleCell II TDM Module
*Incompatibility with older DSP Farms and SampleCell II Cards & The Blue
& White G3 and G4. A rev "QC" or later of the AMCC chip is required for
Blue & White G3 and G4 compatibility. This rev number appears on the
AMCC chip following number "5933". Older versions can cause your
computer to hang while booting or when launching Pro Tools or DigiTest.
QC or higher chip is required for compatibility with the PCI 2.1 spec. Ways
to identify these boards are in the grid below:
Board S/N's Below Manufactured Before
Board Rev
Before
DSP Farm I FF09226 7/9/97 Rev H
SampleCell II HH02001 5/20/97 Rev D
If a customer has previously updated their board (or received a
refurbished card), the serial number will remain the same, but the board
rev will be updated (and the AMCC chip will have "QC" or later). Cards
with the rev "Q" chip can be upgraded, please contact Digidesign directly
to arrange this.
Digidesign Compatibility Documents Index