Specifications

Other Digidesign PCI Card Options - Pro Tools|24 MIX for the Mac
OS
MIX Farm: Maximum of 7 MIX Farm or MIX Core cards supported. If you
are adding one or more MIX Farm cards to a Pro Tools|24 system, refer to
the
Pro Tools Expanded Systems Guide
DSP Farm*: DSP Farms with serial numbers lower than FG10501 may be
used for Plug-In operation but do not support connection of an Audio
Interface.
MIX I/O: Maximum of 2 MIX I/O cards supported (Only 1 MIX I/O card
supported with MIX systems that are upgraded Pro Tools|24 systems).
Some MIX I/O cards may experience recognition problems in the 400 MHz
Blue & White G3 or G4s with AGP Graphics. If so, please contact your local
Digidesign office.
d24: With MIX systems that are upgraded Pro Tools|24 systems some d24
cards may experience recognition problems in the 400 MHz Blue & White
G3 or G4s with AGP Graphics. If so, please contact your local Digidesign
office. d24 card not available for separate purchase.
SampleCell II Plus: The current version of the SampleCell Editor, version
2.1.1, recognizes no more than one SampleCell II or SampleCell II Plus
card in 2001 AGP G4 models (466MHz, 533MHz, Dual 533MHz, 667MHz,
and 733MHz).
SampleCell II*
SampleCell II TDM Module
*Incompatibility with older DSP Farms and SampleCell II Cards &
The Blue & White G3 and G4
A rev "QC" or later of the AMCC chip is required for Blue & White G3 and
G4 compatibility. This rev number appears on the AMCC chip following
number "5933". Older versions can cause your computer to hang while
booting or when launching Pro Tools or DigiTest. QC or higher chip is
required for compatibility with the PCI 2.1 spec. Ways to identify these
boards are in the grid below:
Board
S/N's
Below
Manufactured
Before
Board
Rev
Before
DSP Farm I FF09226 7/9/97 Rev H
SampleCell II HH02001 5/20/97 Rev D
If a customer has previously updated their board (or received a
refurbished card), the serial number will remain the same, but the board
rev will be updated (and the AMCC chip will have "QC" or later). Cards
with the rev "Q" chip can be upgraded, please contact Digidesign directly