Specifications

this configuration requires use of a qualified SCSI HBA card. Optional SCSI
HBA cards bundled (by Apple) with Power Macintosh computers are not
compatible with this configuration due to the lack of NV RAM to store Pro
Tools desired SCSI transfer rate.
When using HDT 2.5.3 or earlier with a qualified ATTO SCSI HBA
card, Firmware v1.1.1 is required. For Blue & White G3 and G4
computers, ATTO ExpressPro-Tools v2.3.2 or higher is required along with
ATTO SCSI HBA card, Firmware v1.3.5 or higher. Please contact
ATTO for
the latest information.
Radius VideoVision not supported: Radius VideoVision is incompatible
with the optional video card included with some Beige G3 Power
Macintoshes. Please contact Radius for the latest information.
Further Exceptions Apply: Please refer to the "Supported CPU Models,
Speeds & Requirements" list back on the
Pro Tools|24 MIX Systems for
Power Macintosh Requirements
page for your chosen computer.
Digidesign Compatibility Documents Index