Specifications

contact your chassis manufacturer for details.
● Chassis must have 3.3 volt power supply
● When used with G3 or G4 computers the Chassis is required to
have PCI 2.1 compliant bridge chips
● Requires 2 foot, 4 foot or 1 meter Expansion Chassis cable - 6 foot
and 1.5 meter cables currently not supported.
● AVoption Users: Please read the additional AVoption Requirements
● AVoption|XL Users: Please read the additional AVoption|XL
Requirements
SBS (Bit3) 7 Slot with Beige G3 requires that the G3 uses Apple's "Silk"
ROM. The “Silk” ROM shipped in late 1998 beige G3 computers with the
following model numbers:
Desktops:
● 266 MHz M6503LL/A
● 300 MHz M7104LL/A
Mini Towers:
● 300 MHz M7246LL/A
● 333 MHz M7106LL/A
Customers with early-mid 1998 G3 machines wishing to use a Pro
Tools|24 MIX system and SBS (Bit3) 7-slot Expansion Chassis should
contact Digidesign for upgrade information.
For more information about expansion chassis setup and card order
configurations please download the Expanded Systems Guide PDF.
Digidesign Card Requirements:
● DSP Farm cards must be Rev H or higher (serial number FF09226
or higher) for compatibility with Expansion Chassis.
● SampleCell II cards: must be Rev D or higher (serial number
HH02001 or higher) for compatibility with Expansion Chassis.
Customers with older cards should contact their local Digidesign office.