Specifications

Expansion Chassis Requirements - Pro Tools|24 MIX
Please see the System Configurations grid at the bottom of this
page for detailed information on which computers Digidesign
supports with the different models of chassis.
13 Slot
● Digidesign Pro Tools Expansion Chassis, 13 Slot
● SBS (Bit3) model DD23
● SBS (Bit3) models 24-700-2-2, 240-2-2 & 240-2-201
● Magma model PCI-13R
● Magma model PCI-13-RX-400V (must have serial number
PE01732 or higher)
Note: 13 Slot Chassis support a total of up to 10 Digidesign cards - this
may include up to 7 MIX Core/Farm cards, 2 d24 or MIX I/O cards and any
number of other Digidesign cards.
7 Slot
● Digidesign Pro Tools Expansion Chassis, 7 Slot (the SBS
model DD007-R is available exclusively through Digidesign as
MH477)
● SBS (Bit3) model DD22-1
● SBS (Bit3) model 2101-00-2 (must use IBM PCI 2.1 compliant
Bridge chips, with host card that starts with 20-101)
● MAGMA model P7R-D1 (7-slot rack-mount expansion chassis.
Blue & White G3 or higher required)
● MAGMA model P7RQ-D1 (7-slot rack-mount expansion chassis.
Blue & White G3 or higher required)
For further information about these products, please contact your
Digidesign dealer or local Digidesign office and ask for the Digidesign
Development Partner Catalog.
Expansion Chassis Requirements
Customers should specify the following requirements when ordering. Any 7-
slot chassis purchased prior to 10/98 will need HW upgrading. Please