Specifications

Power Macintosh 9500 & 9600 - Pro Tools|24 Requirements
Power Macintosh 9600 Processors 200 MHz or higher speed
supported, excluding Multiprocessor (MP) version
Power Macintosh 9500 Processors of all speeds supported,
excluding Multiprocessor (MP) version
Mac OS 9.0, 9.0.2, 9.0.4 required
SCSI HBA Card:
For maximum track count, the Power Macintoshes requires the use of
a qualified SCSI HBA card. Optional SCSI HBA cards bundled (by
Apple) with Power Macintosh computers are not compatible with this
configuration due to the lack of NV RAM to store Pro Tools desired
SCSI transfer rate. The following SCSI HBA cards are qualified for use
with Power Macintosh 9500s & 9600s:
ATTO ExpressPCI SCSI HBA cards including:
PSC (ExpressPCI Single Channel Ultra/WIDE HBA)
EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA)
with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate
set to 20 (10) and PCI Burst Rate set to 32 bytes
● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software
— OR —
Adaptec Power Domain SCSI HBA cards including:
● 2940UW
● 2940U2W
● 3940UW