Specifications

Power Macintosh Beige G3 - Pro Tools|24 Requirements
Beige G3 Processors of all speeds supported
Mac OS 9.0, 9.0.2, 9.0.4 required
SCSI HBA Card:
For maximum track count, the G3 requires the use of a qualified SCSI
HBA card. Optional SCSI HBA cards bundled (by Apple) with Power
Macintosh computers are not compatible with this configuration due
to the lack of NV RAM to store Pro Tools desired SCSI transfer rate.
The following SCSI HBA are qualified for use with Beige G3s:
ATTO ExpressPCI SCSI HBA cards including:
PSC (ExpressPCI Single Channel Ultra/WIDE HBA)
EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA)
with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate
set to 20 (10) and PCI Burst Rate set to 32 bytes
● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software
— OR —
Adaptec Power Domain SCSI HBA cards including:
● 2940UW
● 2940U2W
● 3940UW
with the following requirements:
Firmware v4.1