Specifications

Power Macintosh Blue & White G3 - Pro Tools|24
Requirements
Blue & White G3 Processors of all speeds supported
Mac OS 9.0, 9.0.2, 9.0.4 required
G3 Firmware Update 1.1 required
Available from Apple at:
http://asu.info.apple.com/swupdates.nsf/artnum/n11361
ATTO ExpressPro-Tools v2.3.2 required (supplied on Pro Tools
v5.1 CD-ROM)
External Diskette Drive:
Although not required with Pro Tools installation, an external diskette
drive may be required for some Plug-Ins installations. The following
external USB diskette drives are currently supported:
● Imation SuperDisk
● NewerTechnology uDrive
● VST Floppy Drive (model FDUSB-M)
Links to software and drivers are available in the Digidesign
Support/Downloads/Utilities Section:
● VST Floppy Drive (model FDUSB-M)
● Imation SuperDisk
● NewerTechnology uDrive
● Pace USB Floppy Enabler
Apple's revised USB support allows for booting from a USB drive,
therefore you should not boot up your system with an authorization
disk inserted in the USB Drive.
SCSI HBA Card:
For maximum track count, the Blue & white G3 requires the use of a
qualified SCSI HBA card. Optional SCSI HBA cards bundled (by Apple)
with Power Macintosh computers are not compatible with this
configuration due to the lack of NV RAM to store Pro Tools desired
SCSI transfer rate. The following SCSI HBA cards are qualified for use