Specifications

following SCSI HBA cards are qualified with the Blue & White G3s:
Adaptec Power Domain SCSI HBA 2906 with the following
requirements:
● Firmware v1.1
● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the
Control Panel
● Current Adaptec drivers are available at:
http://www.adaptec.com/worldwide/support/driverindex.html
Previous drivers are available at: ftp.adaptec.com/mac/scsi/
— OR —
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual
Channel Ultra/WIDE HBA) only, with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes
● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software/
Digidesign Compatibility Documents Index