Specifications

● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the
Control Panel
● Current Adaptec drivers are available at:
http://www.adaptec.com/worldwide/support/driverindex.html
Previous drivers are available at: ftp.adaptec.com/mac/scsi/
— OR —
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual
Channel Ultra/WIDE HBA) only, with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes.
● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software/
*Note: Use of a SCSI HBA card requires at least one PCI slot. Apple
computers that do not contain PCI slots, such as the G4 Cube, can not use
a SCSI HBA card.
Digidesign Compatibility Documents Index