Specifications

Digi Toolbox XP with Pro Tools LE for Windows 98 SE and
Windows Me
Digidesign Hardware Supplied
with System
Audiomedia III Card
Digidesign Software Supplied
with System
Pro Tools 5.1 LE
Third-Party MIDI Controllers &
Interfaces
Optional Digidesign Software
Optional Digidesign Hardware
SampleCell II Plus
Supported CPU Models &
Speeds
Highly Recommended:
Intel Pentium III - Processors of
all speeds supported, Single
Processor
Also Supported:
Intel Pentium II - 300 MHz or
faster, Single Processor
Additional Computer
Requirements
● System Software:
Windows 98, Second
Edition or Windows Me
● Total System RAM: 128
MB minimum 192 MB
recommended (Additional
RAM required for
simultaneous use with
MIDI sequencers.)
● Intel chipset and ATX
motherboard
● Phoenix or Award BIOS
(recommended)
● CD-ROM drive for
software install
● AGP or PCI graphic card
Maximum Performance
Guidelines
To provide full 24-track, 24-bit
performance on Pro Tools LE with
high edit densities and the
maximum number of Plug-Ins
follow these guidelines:
● Pentium III at 500 MHz
or higher processor
speed, Single Processor.
Performance and the
number of Plug-Ins will
vary from PC to PC;
however faster is better
● Total System RAM: 192
MB or higher
● File System (all drives):
FAT32
● Also note that we have
seen better performance
on computers that have
less components
attached and non-custom
versions of the BIOS or
Windows 98 SE.
Known Incompatibilities
Caution - Pro Tools LE does NOT
support the following systems or
systems with the following
components:
● Hewlett Packard Pavillion
line of computers
● AMD K6, K6-2 or K6-III
processor based
computers
● Original Pentium
processor based
computers (Pentium I)
● VIA chipset based
motherboard computers
● Laptop Computers
● "ESS Solo-1 PCI
AudioDrive" Sound, video
and game controller. This
device can be disabled
from the "Device
Manager" in the
"System" Control Panel.