Specifications

Power Macintosh Beige G3 - Digi ToolBox XP Requirements
Beige G3 Processors of all speeds supported
Mac OS 9.0, 9.0.2, 9.0.4 required
SCSI HBA Card NOT required: Although Pro Tools LE supports a full 24
tracks of record and playback on a dedicated ATA/IDE hard drive, use of a
SCSI HBA card with a SCSI drive can increase some performance aspects
of your system: for more information refer to the
Audio Storage
Requirements
page. Optional SCSI HBA cards bundled (by Apple) with
Power Macintosh computers are not compatible with this configuration due
to the lack of NV RAM to store Pro Tools desired SCSI transfer rate.
The following SCSI HBA cards are qualified for use with Beige G3s:
ATTO ExpressPCI SCSI HBA cards including:
● PSC (ExpressPCI Single Channel Ultra/WIDE HBA)
● EPCI-DC (ExpressPCI Dual Channel Ultra/WIDE HBA)
with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes
● ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
● ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA cards including:
● 2906
● 2940UW
● 3940UW
● 2940U2W