Specifications

the top of this page:
ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel
Ultra/WIDE HBA) only, with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1, available at:
http://www.digidesign.com/download/ptutil.html
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes, available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA 2906 with the following
requirements:
● Firmware v1.1
● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the
Control Panel
● Adaptec files are available at:
http://www.adaptec.com/worldwide/support/driverindex.html
MIDI:
Both USB and serial MIDI interfaces work effectively with Pro Tools.
Digidesign recommends using a serial MIDI interface, as they offer the
tightest possible MIDI timing. Serial MIDI interfaces require either a Mac
serial port or a qualified modem-to-serial port adapter. Digidesign
currently supports the GeeThree Stealth Port for G4 - AGP Video
(Sawtooth), Stealth Port for Dual Processor G4s and Griffin gPort II
installed in the modem port (thereby not using a PCI slot).
When using the GeeThree products with OS 9.0.4 the latest version of the
Stealth Port extension (v1.0.3) is required. It is available here:
http://www.geethree.com/download.html
Digidesign supports the following MIDI Interfaces for use with the 2001
models of Apple's G4s and Pro Tools® 5.1:
● MOTU Fastlane (USB)
● MIDIport32 2x2 (USB)
● AMT8 (USB/Serial)
While full testing will not be performed with older Pro Tools versions or
older CPUs, we do not anticipate problems using these MIDI Interfaces.
Dual Monitor Display Card: