Specifications

Pro Tools LE Audio File Storage Requirements for Windows 98SE and
Me
IDE/ATA: Full 24 track, 24 bit, 48 KHz performance from just one
dedicated IDE/ATA audio drive is supported.
SCSI:Using a dedicated SCSI drive and SCSI HBA (Host Bus Adapter) card
will, in general, provide the same performance as an IDE/ATA drive, with
the exception that IDE/ATA drives may take a couple seconds to start
recording 24 tracks. External SCSI drives should be used if you desire
portability.
Requirements for both IDE/ATA or SCSI drives:
● Minimum speed of 7200 RPM & average seek time of less than
10.0 ms
● FAT32 or FAT16 file system for Windows 98
● HFS & HFS+ supported when using MacOpener 2000 (demo
version included on 5.1 LE CD-ROM)
● For 24 tracks, drives must be dedicated for audio (internal or
external)
● Boot drives may be used for audio tracks, however
performance/track count may vary
● Each IDE drive must have DMA enabled in the "System" Control
Panel. This can be changed in the "Settings" of each IDE drive on
the "Device Manager" tab of the "System" Control Panel. For
detailed instructions click here
.
Digidesign Compatibility Documents Index