Specifications

BIOS Settings
Print this page or write down the instructions below, as you will
need to restart your computer in order to access your system
BIOS.
To access your computer's BIOS you must restart your computer. During
the initial startup your computer will tell you which key to press in order to
enter the setup program (typically DEL, F1 or F2 for Award BIOS). Press
the corresponding key during startup. You should see an "Entering Setup"
message.
Make this change to your computer's BIOS:
PCI Parity = disabled
Note: Some manufacturers make computers with custom BIOS that do not
include this setting option in their BIOS.
Digidesign Compatibility Documents Index