Specifications

Digi 001 with Pro Tools LE for Windows 98 Second Edition &
Windows Me
Digidesign Hardware Supplied
with System
Digi 001 PCI Card
Digi 001 I/O Box
Digi 001 Cable
Digidesign Software Supplied
with System
Pro Tools 5.1 LE
Third-Party MIDI Controllers &
Interfaces
Optional Digidesign Software
Optional Digidesign Hardware
SampleCell II Plus
Supported CPU Models &
Speeds
Highly Recommended:
Intel Pentium III - Processors of
all speeds supported, Single
Processor
Also Supported:
Intel Pentium II - 300 MHz or
faster, Single Processor
Additional Computer
Requirements
● System Software:
Windows 98, Second
Edition or Windows Me
● Total System RAM: 128
MB minimum 192 MB
recommended (Additional
RAM required for
simultaneous use with
MIDI sequencers. Virtual
memory is not
supported)
● Intel chipset and ATX
motherboard
● Phoenix or Award BIOS
Maximum Performance
Guidelines
To provide full 24-track, 24-bit
performance on Pro Tools LE with
high edit densities and the
maximum number of Plug-Ins
follow these guidelines:
● Pentium III at 500 MHz
or higher processor
speed, Single Processor.
Performance and the
number of Plug-Ins will
vary from PC to PC;
however faster is better.
● Total System RAM: 192
MB or higher
● File System (all drives):
FAT32
● Also note that we have
seen better performance
on computers that have
less components
attached and non-custom
versions of the BIOS or
Windows 98 SE.
Known Incompatibilities
Caution - Pro Tools LE does NOT
support the following systems or
systems with the following
components:
● Hewlett Packard Pavillion
line of computers
● AMD K6, K6-2 or K6-III
processor based
computers
● Original Pentium
processor based
computers (Pentium I)
● VIA chipset based
motherboard computers
● Laptop Computers
● "ESS Solo-1 PCI
AudioDrive" Sound, video
and game controller. This
device can be disabled
from the "Device
Manager" in the