Specifications

configuration.
Additional Requirements:
Mac OS 9.1 required
● PowerBook G4 400 MHz and 500 MHz models require Mac OS 9.1
(included with PowerBook G4)
● OS X is not supported with Pro Tools
SCSI HBA Card required for 24 track performance:
The following SCSI HBA card is qualified with the Apple Titanium
PowerBook G4/Magma configuration:
ATTO ExpressPCI Single-Channel Ultra2/WIDE UL2S
● The Magma 2 Slot Expansion System is available in two models.
Model #CB2S includes the ATTO ExpressPCI Single-Channel
Ultra2/WIDE UL2S model Ultra2 SCSI controller with internal and
external connector.
● Magma Model #CB2 has no SCSI controller and is not approved for
use with the Digi 001 without the addition of the ATTO ExpressPCI
Single-Channel Ultra2/WIDE UL2S.
Atto Software & Settings
● ATTO ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate
set to 20 (10) and PCI Burst Rate set to 32 bytes, available at:
http://www.attotech.com/software/
External Diskette Drive
Although not required with Pro Tools installation, an external diskette drive
may be required for some Plug-Ins installations. The following external
USB diskette drives are currently supported:
● Imation SuperDisk
● NewerTechnology uDrive
● VST Floppy Drive (model FDUSB-M)
Links to software and drivers are available in the Digidesign
Support/Downloads/Utilities Section: