Specifications

SCSI HBA card NOT required: Although Pro Tools LE supports a full 24
tracks of record and playback on a dedicated ATA/IDE hard drive, use of a
SCSI HBA card with a SCSI drive can increase some performance aspects
of your Digi 001 system: for more information refer to the
Audio Storage
Requirements
page. Optional SCSI HBA cards bundled (by Apple) with
Power Macintosh computers are not compatible with this configuration due
to the lack NV RAM to store Pro Tools desired SCSI transfer rate.
The following SCSI HBA cards are qualified for use with Blue & White G3s
ATTO ExpressPCI SCSI HBA card EPCI-DC
(ExpressPCI Dual Channel Ultra/WIDE HBA) only, with the following
requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes
ATTO ExpressPCI Firmware v1.4.4 f1 is available at:
http://www.digidesign.com/download/ptutil.html
ATTO ExpressPro-Tools v2.3.2 is available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA cards including:
● 2906
● 2940UW
● 2940U2W
● 3940UW
with the following requirements:
● Firmware v4.1 (or v1.1 for the 2906)
● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the
Control Panel
● Current Adaptec drivers are available at:
http://www.adaptec.com/worldwide/support/driverindex.html