Specifications

Power Macintosh Blue & White G3 - Digi 001 Requirements
Blue & White G3 Processors of all speeds supported
Mac OS 9.0, 9.0.2, 9.0.4 required
G3 Firmware Update 1.1 required
Available from Apple at:
http://asu.info.apple.com/swupdates.nsf/artnum/n11361
MIDI: Both USB and serial MIDI interfaces work effectively with Pro Tools.
Digidesign recommends using a serial MIDI interface, as they offer the
tightest possible MIDI timing. Serial MIDI interfaces require either a Mac
serial port or a qualified modem-to-serial port adapter.
Digidesign currently supports the GeeThree Stealth Port and Griffin gPort
installed in the modem port (thereby not using a PCI slot). When using the
GeeThree products with OS 9.0.4 the latest version of the Stealth Port
extension (v1.0.3) is required. It is available here:
http://www.geethree.com/download.html
External Diskette Drive:
Although not required with Pro Tools installation, an external diskette drive
may be required for some Plug-Ins installations. The following external
USB diskette drives are currently supported:
● Imation SuperDisk
● NewerTechnology uDrive
● VST Floppy Drive (model FDUSB-M)
Links to software and drivers are available in the Digidesign
Support/Downloads/Utilities Section:
● VST Floppy Drive (model FDUSB-M)
● Imation SuperDisk
● NewerTechnology uDrive
● Pace USB Floppy Enabler
Apple's revised USB support allows for booting from a USB drive, therefore
you should not boot up your system with an authorization disk inserted in
the USB Drive.