Specifications

ATTO ExpressPCI SCSI HBA card EPCI-DC (ExpressPCI Dual Channel
Ultra/WIDE HBA) only, with the following requirements:
● ATTO ExpressPCI Firmware v1.4.4 f1, available at:
http://www.digidesign.com/download/ptutil.html
● ExpressPro-Tools v2.3.2 or higher with Synch Transfer Rate set to
20 (10) and PCI Burst Rate set to 32 bytes, available at:
http://www.attotech.com/software/
— OR —
Adaptec Power Domain SCSI HBA 2906 with the following
requirements:
● Firmware v1.1
● PowerDomain Control v5.1 with cards set to "Fast-SCSI:10" in the
Control Panel
● Adaptec files are available at:
http://www.adaptec.com/worldwide/support/driverindex.html
MIDI:
Both USB and serial MIDI interfaces work effectively with Pro Tools.
Digidesign recommends using a serial MIDI interface, as they offer the
tightest possible MIDI timing. Serial MIDI interfaces require either a Mac
serial port or a qualified modem-to-serial port adapter. Digidesign
currently supports the GeeThree Stealth Port for G4 - AGP Video
(Sawtooth), Stealth Port for Dual Processor G4s and Griffin gPort II
installed in the modem port (thereby not using a PCI slot).
When using the GeeThree products with OS 9.0.4 the latest version of the
Stealth Port extension (v1.0.3) is required. It is available here:
http://www.geethree.com/download.html
Digidesign supports the following MIDI Interfaces for use with the 2001
models of Apple's G4s and Pro Tools® 5.1:
● MOTU Fastlane (USB)
● MIDIport32 2x2 (USB)
● AMT8 (USB/Serial)
● Digi 001 MIDI ports (with Pro Tools LE only)
While full testing will not be performed with older Pro Tools versions or
older CPUs, we do not anticipate problems using these MIDI Interfaces.
Dual Monitor Display Card: