User Manual

ShenZhen Gision Security Technology CO.,ltd
21
Refer to the BSD calibration diagram for calibration: move the red line to the
junction of the sky and the earth, move the green line to the intersection of the road
and the skyline, and move the yellow line to the junction of the rear of the car and
the ground.
The red arrow icon is used to move the red line up and down， The
green arrow icon is used to move the green line left and right， The yellow
arrow icon is used to move the yellow line up and down. Click "Next" to continue
calibration。
Figure 21 BSD alarm zone calibration
The area of the left and right boxes is the alarm area, and the box can be set。
Setting method: There is an adjustable red dot on each corner of the box, through
the arrow on the right You can move the red dot up, down, left, and right 。
Click to switch the red dot and adjust the next red dot。