User manual

2 Introduction

2.2.4 VScom USB-8COM PRO

Figure 5: VScom USB-8COM PRO

Serial Ports 8

Connectors 8×DB9 male RS232, RS422, RS485 (6.1)

Power Self powered 110V - 240V AC, 48 - 67 Hz

FIFO size 128 Bytes Transmit

384 Bytes Receive

LED Power On Front: Red LED

16×Data In Block on Front: Transmit Green, Receive Yellow

8×Mode Near Port: 3-Color

Table 6: Features of VScom USB-8COM PRO Octal Port

2.3 Packing List

All models are shipped with a driver CD-ROM, which includes the documentation and the driver

software.

• USB 2.0 High Speed cable

• CD-ROM with drivers, conﬁguration software and manuals

• Metal plates for Wall mounting or DIN Rail clips

• Power supply hardware if required

2.4 About this Manual

This manual describes the hardware of VScom USB-COM PROs, as well as signal assignments of the

serial connectors. The screen shots in here are made on an English language version of Windows XP.

It is not diﬃcult to ﬁnd the appropriate part in any other language version of Windows. The current

version of the driver is 2.04.16, the version of the ﬁrmware in VScom USB-COM PRO is 1.0.0.

Usually any hardware conﬁguration is described before the software, including drivers. However

the conﬁguration of VScom USB-COM PRO requires the serial port drivers installed, so these are

covered ﬁrst.

June 2009 USB-COM PRO User Manual 9