Installation guide

Installation guide 1 (of 14)
Symbols
The following pictogram is used in this installation guide:
Caution, calls attention to a procedure, which, if not correctly executed,
could result in damage to the equipment or personal injury. Do not proceed
beyond a "CAUTION" sign until the indicated conditions are fully unders-
tood and met.
General precautions
Execute periodic leak checks on LC tubing and connections. Do not allow
flammable and/or toxic solvents to accumulate. Do not close or block
drains. Follow a regulated, approved waste disposal program. Never dis-
pose of such products through the municipal sewage system.
LC equipments should be used by trained laboratory personnel only.
Use proper eye and skin protection when working with solvents. Ad-
ditional safety requirements or protection may be necessary depend-
ing on the chemicals used in combination with this equipment. Make
sure that you understand the hazards associated with the chemicals
used and take appropriate measures with regards to safety and pro-
tection.
Use of this product outside the scope of this guide may present
a hazard and can lead to personal injury.
Spare parts and service availability
Manufacturer provides operational spare parts of instruments and current
accessories for a period of five years after shipment of the final production
run of the instrument. Spare parts will be available after this five years pe-
riod on an ‘as available’ basis.
Manufacturer provides a variety of services to support her customers after
warranty expiration. Repair service can be provided on a time and material
basis. Contact your local supplier for servicing. Technical support and train-
ing can be provided by qualified chemists on both contractual or as-needed
basis.