User manual

5 NetUSB-400i USBIP Web Server
On password prompt please give admin as user name and usbip as password. The password usbip is
a default one that can be changed from USBIP Admin Utility. If there is no prompt for password
please ensure ’proxy settings’ are disabled in the Windows PC Browser software (e.g. Internet
Explorer).
1. Home Page contains the information about current network settings, it displays ...
a) Server Summary:
i. Serial Number
ii. Server Name
iii. Server Model
iv. Firmware Version
b) Network Summary:
i. MAC ID of the USB Server
ii. Server IP
iii. Subnet
iv. Gateway
v. IP Configuration
2. It also shows a welcome greeting and the user accessing the web server.
5.2 Network Page
On the Network Page you can configure the Static IP, Subnet Mask, and Gateway manually or
set the NetUSB-400i USB Server to automatically obtain an IP address by setting to the Dynamic
(DHCP) mode.
Figure 43: Network Page
October 2009 NetUSB-400i User Manual 31