User manual

4 Windows Utility

4.1.3 Restore factory Defaults

Right click on the USB Server in the Server Manager Window and select the Restore Factory Defaults

function to obtain the manufacturers Default settings as shown below. Or use this function via

Server Manager in the Menu bar.

Figure 23: USBIP Restore Factory Defaults

Then USBIP Admin Utility pops up a window asking to continue or not. If you select the OK

button it will set the NetUSB-400i to manufacturer’s default settings.

Figure 24: USBIP Restore OK

• The Restore Factory default settings can also be implemented by pressing the Default button

(section 6.2) for ten seconds.

4.2 Quick Conﬁguration Utility (Search USB Server by MAC-ID)

Each USB Server has a unique MAC-ID, and can be searched and conﬁgured even if the Server is

not yet conﬁgured in the same network (i.e. the IP Settings do not match your PC conﬁguration).

The Search by MAC ID Quick conﬁguration utility enables the user to search the box by its MAC-

ID. With this feature, one can detect and conﬁgure the IP Settings of the NetUSB-400i USB Server

that is present in the same physical network (same LAN).

Note: This feature will not identify or conﬁgure the NetUSB-400i USB Servers, which are behind

the Router (across the networks).

Right Click on the Server Manager Icon or the Server Manager Window and Select Search by MAC ID

to launch the quick conﬁguration utility (ﬁgure 25).

October 2009 NetUSB-400i User Manual 19