Instruction Manual
Table Of Contents
- Glossary of terms
- Assistance
- Information on this manual
- Safety
- Reception
- Product description
- Getting started
- Operating with VR NxT
- Maintenance of the instrument
- Troubleshooting and errors
- Technical features
- ANNEX A: CELLSEARCH sample preparation for DEPArray
- ANNEX B: DEPArray recoveries preparation for downstream genetic analysis
- License Agreement
- Conformity
- Warranty and Responsibility
36 VR NxT| Instruction Manual 1.0 02-2019|VRNXTinstr1EN|© 2019 Menarini Silicon Biosystems SpA
Maintenance of the instrument
3. Use the swab small head to clean the internal part of the holder.
4. Prepare a solution made of water and a 70% Ethanol solution and put it on another swab small head.
5. Use this swab small head to remove any residue of DNA AWAY from the holder internal part.
6. Clean the holes with the hole brush.
7. Clean the holder surface with a damp lint-free cloth.
8. Put the DNA AWAY on the cloth and clean the holder surface again.
9. Put the solution made of water and a 70% Ethanol solution on another damp lint-free cloth.
10. Use this lint-free cloth to remove any residue of DNA AWAY from the holder surface.
11. Let the holder dry.
Software and program update
Update management
Menarini Silicon Biosystems will deliver the USB flash drive with the updated software or programs when available.
Update software and programs
1. Insert the USB flash drive in the USB port.
2. Press and simultaneously for about 6 seconds to enter the menu.
3. Select Update: the update starts automatically.
4. Wait until the end of the update:the instrument restarts automatically.
5. Remove the USB flash drive.
Maintenance
In case of damage or malfunction, contact Menarini Silicon Biosystems (see "How to contact Technical Support" on
page4). The instrument and its components cannot be repaired by the user (see "Assistance" on page4).
Instrument lifetime
The instrument has a lifetime of seven years. After seven years, it shall be reconditioned. Ask to Technical Support for
instrument reconditioning (see "How to contact Technical Support" on page4).