Instruction Manual
Table Of Contents
- Glossary of terms
- Assistance
- Information on this manual
- Safety
- Reception
- Product description
- Getting started
- Operating with VR NxT
- Maintenance of the instrument
- Troubleshooting and errors
- Technical features
- ANNEX A: CELLSEARCH sample preparation for DEPArray
- ANNEX B: DEPArray recoveries preparation for downstream genetic analysis
- License Agreement
- Conformity
- Warranty and Responsibility
Product description
VR NxT| Instruction Manual 1.0 02-2019|VRNXTinstr1EN|© 2019 Menarini Silicon Biosystems SpA 15
Closed holder structure
Structure
The closed holder is composed of the following parts:
Part Name Function
A Cap Not included.
l Close the holder.
l Trap the liquid after each run.
B Cap RFID tag l Identify the cap type.
l Guarantee the cap presence and compliance.
C Holder Contain the tubes.
D Cavity for the tube cap Align the tube caps.
E Slot for the tube Contain the tube during the run.
F Holder clip Fasten the cap to the holder.
G Hole for the cap Permit the instrument to check the presence of the cap.
H Holder identification
code
Identify the holder type.
I Number 1 Provide a reference point for positioning the tubes.
J Hole for diagnostic
tests
Perform diagnostic checks on the closed holder.
K Holder RFID tag l Identify the holder type.
l Guarantee the holder presence and compliance.
L Holder screw Fix the holder RFID tag to guarantee the holder integrity.