Operation Manual

ENGLISH | 25

ENGLISH

Interferential Stimulation:

Pulse amplitude: 0 - 25V peak

Pulse shape: With four (4) electrodes – symmetric, biphasic

square wave

With two (2) electrodes – symmetric, biphasic

rectangular wave

Pulse width: With four (4) electrodes – 125 μs per phase

With two (2) electrodes – 5 μs to 125 μs per

phase

Output Conﬁguration:

Quadrapolar: Ch. 1 delivers a ﬁxed-frequency carrier pulse

train. Ch. 2 delivers a user-adjustable frequency

that consists of the carrier frequency, plus a

beat frequency. Four (4) electrodes are

required.

Bipolar: Ch. 1 delivers a pulse train that is premodu-

lated inside the unit. Ch. 2 is not used and

has no stimulation pulses. Two (2) electrodes

are required.

Carrier frequency: 4000 Hz

Adjustable frequency:

Continuous mode range: 4001 Hz - 4150 Hz, in 10 Hz increments

(beat frequency of 1 - 150 Hz)

Sweep modes 1 1 - 10 Hz over a 30-sec period

2 1 - 150 Hz over a 30-sec period

3 80 - 150 Hz over a 30-sec period

4 1 - 10 Hz over a 15-sec period

5 1 - 150 Hz over a 15-sec period

6 80 - 150 Hz over a 15-sec period

Frequency shift mode range: 4000.6 Hz - 4240.0 Hz