Operation Manual

24
ENGLISH
Physical:
Power source: Two (2) VQ OrthoCare Power Packs.
The Avid IF 2 can also be run with
a VQ OrthoCare AC Adapter.
Size: 5.7” x 3.0” x 1.5” (14.5 x 7.6 x 3.8 cm)
Weight: 12.8 oz. with alkaline Power Packs
Lead wire length: 22.0” (55.88 cm) unstretched
Electrodes: Normal – should be used with electrodes 2”
x 2” or larger. The device will allow normal
amplitudes as specified for each modality.
Small – should be used with electrodes
1.25” x 2” to 2” x 2”. The device will limit
the maximum amplitude to 60% of the spec-
ified maximum for each modality (30mA for IF).
Garment – can be used with conductive
garments. This setting will disable the
load sensor.
Electrical tolerances: All electrical specifications are ± 10% into a
500 ohm load for each channel and using
the AC Adapter, unless stated otherwise.
Treatment timer: 1-30 minutes in one-minute increments
35 minutes-8 hours in five-minute increments
8-24 hours in one-hour increments (sleep
mode only)
Compliance timer: 0 min - 999 days, in 1-min increments
Number of preset programs: 1 - 20, according to physician orders
Cycles: 1 - 99
Next preset: 1 - 20 or OFF
Outputs: Wires or tips (IF)
Technical Data and Specifications