Operation Manual

ENGLISH | 11

ENGLISH

Save the non-working electrodes for evaluation by VQ OrthoCare’s Quality

Assurance Department; DO NOT THROW THEM AWAY!

4. Gently remove the electrodes from the plastic liner. Place the electrodes

on the sites prescribed by your physician or therapist and press them

ﬁrmly onto the skin. Electrodes should be placed at least one inch

apart from each other.

5. Insert the lead wire into the

Avid IF 2. For instructions,

see page 8.

Select

Protocol

PAIN

40:00

(S) Select

6. Turn the Avid IF 2 on by pressing the (ON/OFF) button. The serial

number and compliance time will be displayed. After releasing the

(ON/OFF) button, the Avid IF 2 will start its self-test. When the

self-test is completed, you will see Select Protocol at the top of the

screen and a number 1 ﬂashing in the middle of the screen, along

with the length and purpose of treatment (e.g., pain; spasm).