Operation Manual

ENGLISH
8
Accessories
Lead Wire
The lead wire connects the
Avid IF 2 to the electrodes.
When plugging the lead wire
into the Avid IF 2, make sure it is
pushed firmly into the socket, with the
strain relief pointing toward the bottom of
the Avid IF 2 (as shown). To remove the wire,
grip the connector close to the socket and pull
straight out.
Power Supply
The Avid IF 2 can be operated with two non-rechargeable alkaline
Power Packs or the AC Adapter.
Power Packs
The unit should be turned off when switching from one power source to
the other. Additional Power Packs can be ordered from VQ OrthoCare’s
Patient Care Department by calling 800.452.7993.
Alkaline Power Packs (non-rechargeable)
Insert two alkaline Power Packs in the Avid IF 2 with
the ribbon handle facing out. The plus symbol should
be aligned toward the top right of the Avid IF 2 and
the minus symbol toward the bottom left, as indicated
on the label. When the display indicates low battery
power, remove and properly dispose of. Power Packs
cannot be re-used or recharged.