User Manual

Slide the Fan mount into the slot on
the top of the fuselage as shown.
Using a pencil, trace around the fan mount
where it meets the fuselage.
Remove the fan mount from the fuselage.
Using a sharp hobby knife, carefully cut away
the covering inside the lines which were marked
above. Be cautious not to cut into the wood-this
will weaken the structure.
Note: Insert the Electric cord for EDF into the
fuselage at this time.
Cut away only
the covering
Electric cord
for EDF
Hornet EDF
11
Instruction manual
15 Ducted fan mount installation
Step 14A
Step 14B
Step 14C
X