User Manual

AILERON STROKE
ELEVATOR STROKE
RUDDER STROKE
Adjust the travel of the control surfaces to achieve the values stated in the diagrams.
These value will be suitable for average flight requirements. Adjust the values to suit your particular needs.
(88 ~ 93mm)
Note: Adjust the location of the battery pack to achieve this C.G location.
DO NOT try to fly an out-of balance model!
Wing center section
FLAPS STROKE
(25-30mm)
(15mm)
(15mm)
(25mm)
(25mm)
(10mm)
(10mm)
How to add nose weight
To get the correct C.G., Several strips of lead weight were
required in the nose of this model .
To minimize the amount of weight required, it is desirable to
position the weight as far forward as possible.
IMPORTANT: Recheck the C.G. After the weight has been installed.
Lead
Lead
25- BALANCE
P-47 THUNDERBOLT
26- CONTROL SURFACE
P-47 THUNDERBOLT
I
P-47D “Tarheel Hal” IA-N
24- STICKER
P-47 THUNDERBOLT