User Manual

Table Of Contents

Using a wooden motor mounting plate as a template,

mark the fire-wall where the four holes are to be drilled.

Remove the wooden motor mounting plate and drill

a 5mm hole through the fire-wall at each of the four

marks marked .

5x70mm bolt.....4

5mm nut..........12

5mm washer...16

Attach the four 5x70mm bolts

and nuts to the fire-wall as shown.

3mm bolt / nut...4

Secure the Motor to the wooden

motor mounting plate using the

four 3mm bolts.

Using a aluminum motor mounting plate

as a template, mark the plywood motor

mounting plate where the four holes are

to be drilled.

Remove the aluminum motor mounting

plate and drill a 1/8”(3mm) hole through

the plywood at each of the four marks

marked .

3mm

FUSELAGE - TOP VIEW

B’

FIRE-WALL

! Align the mark on wooden motor

mounting plate with the mark on

the fire-wall.

5mm

130mm

3- Electric Motor installation