User Manual

Using a pencil or felt tipped pen,
mark the fire wall where the four
holes are to be drilled
5mm
13/64”
Remove the engine mount and drill
a 13/64”(5mm) hole through the
fire-wall at each of the four marks
marked.
Attach the four blind-nut to the fire-wall as show
4mm
! Align the mark on both mounts
with the mark on the fuselage
! Engine thrust on balk head
is already adjust at factory
Engine mounts
Front-view
LEFT
RIGHT
A
A
B
B’
B=B’
..........4
4mm Blind-nut
1- Engine installation
1A
1B
1C
1D
1E