User Manual

6- Nose landing gear
3x20mm screw
Attach the nose gear mount onto the
fire-wall and secure it in place using
four 3x20mm screws.
Route the steering linkage into the fuselage
and through the fire-wall.
Insert “Z” bend of steering linkage into the hole
of steering arm.
Glue the outer tube in place as shown.
CA
Slide the nose landing gear through the nose gear
mount and steering arm with the flat to front.
Tighten the screw of the steering arm to the nose
landing gear.
Flat
6B
6A
6C
6D
Attach the fiberglass dome to the fuselage and secure it
in place using 2x8mm self tapping screws.
Nose gear mount
3x20mm screw...4
Steering arm...1
..............1
4mm collar
..........2
2x8mm self tapping screw
..........5
6E
1mm
1mm