User Manual

11- Rudder and Elevator
Cut away only
the covering
CA
Apply thin CA
glue on the top
of the hinge
Apply a thin layer of petroleum jelly
HORIZONTAL STABILIZER
HORIZONTAL STABILIZER
TOP-SIDE
TOP-SIDE
Note: The rectangular holes are
pre-laser cut at factory
Cut away only
the covering
Do the same way with bottom side
! Securely glue together. If coming off during fly,
you lose control of your air plane.
CA
Thin CA
CA
Thin CA
11A
11B
11C
11D
! Securely glue together. If coming off during fly,
you lose control of your air plane.