User Manual

Table Of Contents

2- Insert “Z” bend of steering linkage inside the hole of front landing gear

Steering arm.

3- Position the steering arm inside the front landing gear mount already

Attached to the firewall.

5- Screw steering arm on the leg.

Nose gear mount

3x20mm screw...4

Steering arm...1

..............1

IN CASE OF ELECTRIC RETRACT LANDING GEAR USING

Nose gear pushrod

Steering horn

10-Nose gear

(Electric retract landing gear and Struts must purchase separately)

3mm nut, washer...4

1- Route the steering linkage into the fuselage and through the

fire-wall.

4- Slide in the front gear leg with the flat to back through the bearing and

steering arm.

Flat

Landing gear steering arm

Steering linkage