User Manual

Ply gear mount
plate x 2
Plywood Gear mount
x 2
3x20mm screw
.......16
Nylon gear strap
.......4
7A
Slide the landing gear onto the
plywood gear mount and push
the landing gear as shown.
7B
Using the nylon gear strap
as a template, mark the
plywood gear mount where
the four holes to be drill.
Remove the nylon gear
strap and drill a 2mm hole
at each of the four marks
marked.
7C 7D
7E
Attach the ply gear mount plate
to the plywood gear mount
Secure the ply gear mount
plate in place using CA glue.
7F
7G
Drill a 2mm holes through the
square plastic and ply gear
mount plate.
Secure the ply gear mount
using four 3x20mm screws.
CA
Reposition the nylon gear
strap and secure them in
place using four 3x20mm
screws.
2mm
CA
Attach the square plastic
onto the ply gear mount,
secure it in place using
CA glue.
7H
Square plastic
x2
TOP VIEW
BOTTOM VIEW
7- Fixed gear installation
Siai Marchetti SF-260