User Manual

Reposition the engine mount beams on to the fire-wall
and secure them with four 4x25mm screw.
...................4
....................4
4x25mm screw - washer
Blind-nut
Insert the blind-nut onto each
of the four holes make above .
! Engine thrust on balk head
is already adjust at factory
140mm
FUSELAGE
3mm
SIDE-VIEW
Siai Marchetti SF-260
18- Engine continued
3mm
Position the engine to the engine mounts so the distance
from the prop hub to the fire-wall is 140mm.
Mark the engine mounting plate where the four holes are
to be drilled.
Remove the engine and drill a 3mm holes through the beam
at each of the four marks made above.
Marking sure that you drill the hole perpendicular to the beam
of the engine mount.
18A
18B
18C
18D