User Manual

Control horn Alignment
STABILIZER
Attach the rudder control horn using the hardware provided
(two 2x15mm screws and a back plate).
Plastic control horn
2x15mm screw
............................3
.....................6
Plastic back plate
...........................3
2mm
2mm
2mm
Siai Marchetti SF-260
16- Control horn installation
17- Engine
2x12mm
! Align the mark on both engine mount
beams with the mark on the fuselage
Attach the engine mount beams onto the fire-wall
so the distance between of two engine mount beams
is “A”,and B=B’ as show.
Secure the engine mount beams onto the fire-wall
with litter CA glue (1B)
Using a pencil or felt tipped pen, mark
the fire wall where the four holes are to
be drilled(1B))
6mm
A
B
B’
B=B’
CA
A
B
B’