User Manual

Carefully slide the wing halves together,
ensuring that they are accurately aligned.
Firmly press the two halves together,
allowing the excess epoxy to run out.
Note: The two wing halves roots must
fit together perfectly.
Clear off the excess epoxy.
! Make sure to glue securely, If not properly glued,
a failure in flight may occur.
Glue must go inside
Wing joiner
Glue
Wing half
Hold the wing halves together with paper
clamp and rubber band.
IMPORTANT:
Please do not clean off the excess epoxy on the
wing with strong solvent or pure alcohol, only use kerosene to
keep the colour of your model not fade.
30 min. Epoxy
WING TOP-VIEW
Rubber band
(not include)
Paper clamp
(not include)
Nylon wing bolt
(included)
WING TOP-VIEW
A
B
A
B
A
B
30 min. Epoxy
WING TOP-VIEW
A
B
Siai Marchetti SF-260
11- Joining the wing halves
12- Wing tip Tank
CA
L/R