User Manual

Siai Marchetti SF-260

14- Horizontal Stabilizer installing continued

15- Rudder and Elevator

! Securely glue together. If coming off during fly, you lose control of your air plane.

Apply thin CA glue where the fuselage

meet the horizontal stabilizer (both sides).

Install the horizontal stabilizer onto the fuselage and adjust the alignment as described in steep 13B.

Note: it is important to ensure that the horizontal stabilizer is also level in regards to the fuselage.

Apply the thin CA along the area where the covering was removed in the previous step and to the

fuselage where the horizontal stabilizer mounts .

Apply thin CA

glue on the top and

bottom of the hinge

HORIZONTAL STABILIZER

TOP-SIDE