User Manual

Slide the rudder pushrod into the hole
on the rudder control horn before glue
the rudder control horn in place.
Cut away only
the covering
A
B
5 min. Epoxy
4- Vertical Tail / Seitenruder
WARNING!: Securely glue together, if coming of
during flights, you lose control of your plane
which lead to accidents.
Fuhren Sie die Verkiebungen mit gro ter
Sorgfalt aus.
FUSELAGE - TOP-VIEW
Aufsicht
Elev. / Rudd.
Plastic control horn
Slide the elevator pushrod into the hole
on the elevator control horn before
install the horizontal stabilizer onto the
fuselage .
FUSELAGE - TOP-VIEW
Aufsicht
5- Horizontal Tail / Hohenruder
4x30mm
nylon bolt
30x4mm nylon bolt
............1
Secure the servo tray in place using 5min. Epoxy or CA glue
Securely glue together. If coming off during flight, you lose control
of your air plane.
FUSELAGE - TOP-VIEW
Aufsicht
6- Servo tray
S-R
3mm plywood servo tray
FBD2
FBD
The hole on the FBD2 for the hook installation.