User Manual

AILERON
SERVO
..........2
2x20mm.....4
..........2
X
3mm set Screw
2 mm
Aileron pushrod
D=5/64”(2mm)
4- Aileron linkage
WING BOTTOM-VIEW
Adhesive tape
L/R
Aileron pushrod
D=5/64”(2mm)
Align the engine center with fire-wall
marked line (A=A’)
A
A’
FRONT VIEW
Using the four 3x20mm
screws securing the engine
to the engine-mount
............4
.....................4
4x15mm screw
Blind-nut
............4
3x20mm screw
.....................4
3mm nut
3mm washer
.....................4
4mm washer
.....................4
Align the mark on both
mounts with the center
mark on the fire-wall
B
B=100 ~ 105mm
5- Engine - 4T
Handle (3mm ply wood)
CA
Magnetic hatch
Four holes are pre-drilled at factory
TOP-VIEW
5mm
!
4mm
2x20mm screw