User Manual

BOTTOM-VIEW
Wing installation
6x50mm
Nylon bolt
6x50mm Nylon bolt
....2
CA
(105 ~ 110mm)
Note: Adjust the location of the battery pack to achieve this C.G location.
DO NOT try to fly an out-of balance model!
15/64”(6mm)
13/32”
(10mm)
13/32”
(10mm)
1-23/64”
(35mm)
AILERON STROKE
ELEVATOR STROKE
RUDDER STROKE
1-23/64”
(35mm)
15/64”(6mm)
Adjust the travel of the control surfaces to achieve the values stated in the diagrams.
These value will be suitable for average flight requirements. Adjust the values to suit your particular needs.
FLAP STROKE
51/64”- 1-3/16”
(20 - 30mm)
Do not try to fly an out-of balance model!
Balance / Schwerpunkt
Control surface / Ruderausschlage
Aileron servo hatch
Sticker
Do the same way with another half wing.
Decor / Aufkleber
BOTTOM-VIEW
Aileron servo hatch
1
2
IMPORTANT:
Please do not clean your model with pure alcohol, only
use liquid soap with water or use class cleaner to clean
on surface of your model to keep the colour not fade.
UNTERSICHT
UNTERSICHT
26-
27-
28-
29-