User Manual

18-
X
To muffler
Filler tube
To engine
3x25mm
screw
Rubber stopper
After confirming the direction . Insert this
assembly, clunk end first, into the fuel tank
and tighten and screw the fuel tank cap on
firmly.
Firewall
B’
B
B=B’
A
A=A’
A’
TOP-VIEW
SIDE-VIEW
! Engine thrust on balk head
is already adjust at factory
Using a aluminum motor mounting plate as
a template, mark the plywood motor mounting
plate where the four holes are to be drilled (2).
Remove the aluminum motor mounting
plate and drill a 1/8”(3mm) hole through
the plywood at each of the four marks
marked .
CA
3mm
1
2
Note: The aluminum motor mounting included
with electric motor set.
4mm
19-
Fuel tank / Treibstofftank
Brushless Motor
Seitenansicht
Aufsicht
Sturz und Zug beachten!
! Engine thrust on balk head
is already adjust at factory
Sturz und Zug beachten!
123 ~ 126mm