User Manual

AILERON STROKE
ELEVATOR STROKE
RUDDER STROKE
Adjust the travel of the control surfaces to achieve the values stated in the diagrams.
These value will be suitable for average flight requirements. Adjust the values to suit your particular needs.
CENTER FLAP STROKE
(25mm)
(92 ~ 96mm)
Note: Adjust the location of the battery pack to achieve this C.G location.
DO NOT try to fly an out-of balance model!
Wing center section
RIGHT&LEFT FLAP STROKE
(50mm)
(10mm)
(10mm)
(25mm)
(25mm)
(6mm)
(6mm)
IMPORTANT: Please do not clean your model with strong solvent or pure alcohol, only use kerosene to keep the
colour of your model not fade.
Cut the opening
Cut the opening
CA
21-DECOR
22-BALANCE
23-CONTROL SURFACE
Do the same way with other side