Technical Specifications

5. INSTALLATION: See installation sheets for detailed instructions.
The areas to receive stair treads should be clean and maintained at a uniform temperature
between 65℉ and 85℉° before, during, and after installation is complete. The stair treads and
adhesives need to be conditioned in the same manner, by acclimating them in the same space for
a period of 48 hours prior to installation. Boxes need to be kept out of direct sunlight or close
proximity to air conditioning units.
Sub-floor preparation needs to follow detailed instructions on instruction sheet. Use the
instruction details regarding a butt joint or lap joint under the nose. Note specific instructions
with regards to porous and nonporous subfloors and when to lay treads after applying the
adhesive.
6. MAINTENANCE:
Stair treads should be maintained by hand, with maintenance procedures not to begin until 2 days
after installation. Follow maintenance instructions as detailed in the installation instruction
manual.
7. AVAILABILITY AND COST
Available from VPI and VPI Distributors Nationwide.
Available in Jet, Pewter, Café Au Lait, Burnt Umber, and Charcoal colors.
8. WARRANTY
Limited 6-year warranty against defects in manufacturing and workmanship. For complete
details, contact VPI Corporation.