Technical Specifications

Specifications
VINYL STRINGER
ACCEPTABLE MANUFACTURER
1. VPI Corporation, 3123 South 9
th
Street, P.O. Box 451, Sheboygan, WI 53082-0451
FLOOR COVERING SPECIFICATION
1. Vinyl Stringer MEETS ASTM F-1861 standards
2. VPI Vinyl Stringer Type TV,
3. Vinyl Stringer with sizes as follows:
Width: 7” Thickness: 0.080” Lgths: 48” PCS per CTN: 24 pcs.
7” 0.080” Rolls: 50’ 50 lf. / roll
MANUFACTURING SPECIFICATIONS
1. See all ASTM specifications per VPI web site: www.vpiflooring.com
2. Meets VPI specific VOC, durability and other performance standards without exception or deviation
ADHESIVE SPECIFICATIONS
1. VPI 503 acrylic or 100 Epoxy adhesives.
2. Use specified trowel and roller per VPI installation and maintenance instructions.
PRE- INSTALLATION AND INSTALLATION SPECIFICATIONS
1. See VPI wall base installation and maintenance instructions for all installation requirements
POST INSTALLATION SPECIFICATIONS
1. Prohibit traffic in area for 48 hours after installation.
WARRANTY INFORMATION
1. 1 year warranty that products are free from defects in materials and workmanship.
VPI Technical Service: [phone]
Vinyl Stringer Specs 20
c